|
|
1.INTRODUCTIONThe Learning objectives for this introductory course in silicon-photonics include: basic properties of silicon waveguides; the essentials of silicon-on-insulator (SOI) waveguide fabrication (WGs); dispersion and propagation loss in Si WGs; analysis and design of various passive silicon devices such as strip and rib waveguides, directional couplers, Y-branch splitter/combiner, Mach-Zehnder interferometer; design and modeling of Bragg grating for light coupling in and out of devices/circuits; develop matrix method analysis in order to determine the transfer function of a passive device; modeling and characterization a Mach-Zehnder silicon modulator (MZI); use free shareware KLayout to generate integrated photonic circuit (PIC) layouts for E-beam lithography. This is a research based learning class for senior and graduate students on silicon-photonics (SiPh) design, fabrication, and testing where they are given both theoretical and laboratory projects to do. Students will be using various software in this course: MATLAB, KLayout, Excel, and Lumerical. We have also obtained educational license agreement with Lumerical Company through their Knowledge Exchange program for the free use of their Mode Solutions and Interconnect software. Students use Lumerical in order to evaluate mode propagation in various Si-WGs and passive components as well as to model and evaluate performance characteristics of their designed PICs. The textbook for the course is the one by Lukas Chrostowski and Michael Hochberg, titled: “Silicon Photonics Design from Devices to Systems” This textbook includes many useful codes and examples developed in Lumerical as well as MATLAB [1]. Projects assigned to each student is to design and model a passive or an active device such as ring resonator filters or Mach-Zehnder Interferometers with applications in either sensing or communications. For example the MZI device must be consisted of waveguides, couplers, Y-splitters, and input/output Bragg gratings. These devices are to operate at 1550 nm. This course also has a fabrication and testing laboratory to enhance student’s learning with this technology. The goal is to make a light modulator on an SOI wafer and characterize its performance using a single-mode fiber-optic link. An example process flow for fabricating this device is provided in Table 1. 2.Modeling a DeviceThe MZI is an optical device that uses the Interferometer effect: an input signal is divided between two paths; a given phase change is applied to the signals in each path; and finally, both signals are recombined at the output (see Figure 1). Where Φ1 and Φ2 are the phase changes for each optical path. If we analyze the interferometer as a system, it is possible to find its transfer function equation: Where Where ΔNe and ΔNh are the charge density for electrons and holes, e is the electron charge, ɛ0 is the permittivity of free space, If we use thermic control heaters instead of P-N junctions, it is possible to achieve differences in the refractive index of ~10–2. In this case, the physics behind the problem is much simpler if we ignore the effects of thermal displacement and expansion. The simplest model for a change in the refractive index is given by the equation: Where n0 is the refractive index of the material, These two types of modulation behave in different ways, and in practice, switching frequencies of the order of MHz have been achieved with Thermo-optic MZM [2], while frequencies of ~10 GHz have been achieved with PIN MZM [3]. Figure 2 shows the numerically calculated results of temperature dependence of the effective index, this simulation is made ignoring dispersion effects or any loss by Joule effect. These values are calculated for 3 geometries 220×500 nm strip waveguide (black), 220×500 nm with 90 nm rib waveguide and the multimodal 220×2500 nm strip waveguide used in this design (blue). Figure 3 shows the calculated values of Δn as a function of the charge density, it’s clear here that using p+ doped zones are more useful in a design since the plasma effect is more pronounce for the lower density values. 2.EXPERIMENTATIONThe first part is to fabricate an SOI wafer using PECVD and dry oxidation processes in the cleanroom. The modulator devices are designed to work with a strip waveguide 220×500 nm. This fabrication process is a 3 mask process with each MZI to have seven different kinds of modulation schemes to choose from. This includes active zone with P-N junctions (4 variations), with or without active zone with heaters. Fabrication steps include photolithography, etching WGs, doping process to create PN-junction, depositing oxide cladding, and making the metal contacts. The following is the procedure for fabrication process using an SOI wafer. The designed mask has three types of patterns:
All of MZI layouts are based on two Y-Junctions with an angle of 18°. These devices are designed to work with a strip waveguide 220×500 nm. Figure 4 shows the waveguide cross-section and Fig. 5 shows the footprints of each MZI with its dimensions. There are 7 different kinds of MZI modulation schemes available to use: Figure 6 shows the different types of modulation schemes. In the layout, the devices are arrange as Units Cells (UC). Each UC has 4 Inputs and 4 outputs and a size of 7×6 mm. In one UC are included the 7 kinds of MZI, each input illuminate 2 devices at the same time, the outputs are aligned to measure from 1 device at a time independent of the source. Figure 7 shows the footprint of a UC. Figure 6:Types of modulation schemes implemented on the mask designed. (a) and (b) PiN junction based, (c) thermo-optic based. ![]() As the mask for P junctions is the same for N junctions (a rotational symmetry was considered for the design), the distribution on the wafer is mirrored around the Y axis, the schematic arrangement is showed in figure 8. In order to process a wafer, the following steps are carried out (the RCA clean steps are neglected from the list):
For metal contact and heat pads nickel is sputtered. Nickel (Ni) etches isotropically in acidic solutions. The etch rate for Nickel in acidic bath is typically on the order of 10-15 nm/min at 55°C. The etch rate of SiO2 in acidic medium is considerably slower than Nickel, so the etch effectively stops when the nickel layer is removed and the SiO2 layer is exposed. However, it is not advised that one leave a wafer in the etchant for an extended period of time because of the undercutting that can take place. Therefore, the time for which the wafer remains in the etchant solution should be based on the thickness of the nickel thin film on the wafer. Typically, one assumes an approximate deviation of these parameters of 10%. What this means is that one should add an additional 10% to the calculated time for which a wafer should remain in the etchant. The photoresist mask that was patterned in the photolithography step will also be unreactive during the etch. 4.CHARACTERIZATION OF THERMO-OPTIC MZIAfter fabrication each group of student will test and characterize a MZI-modulator of their choice using the SMF input and output for light from a DFB laser at 1550 nm wavelength to a high-speed photodetector. We will discuss a typical individual project and experimental work by a group of students and comment on student’s learning and course evaluations for silicon photonics course. To examine the figure of merits of a SOI modulator fabricated in the cleanroom many equipment such as: laser diode, high-speed detector, fiber scope, micromanipulator apparatus, power supply, multi-meters, function generator, oscilloscope are required. A test set like the one shown in figure 10 is used for this purpose. Students are asked to use:
ACKNOWLEDGMENTSAuthor would like to thank all my graduate students who help with the fabrication and testing processes of this project and in particular: Jeongho Park, Pablo Nahuel Pelli, and Ehsan Ordouie. REFERENCESLukas Chrostowski and Michael Hochberg,
“Silicon Photonics Design from Devices to Systems,”
Cambridge University Press,2015). Google Scholar
Robert A. Mayer, K. H. Jung, W. D. Lee, Dim-Lee Kwong, and Joe C. Campbell,
“Thin-film thermo-o ptic GexSi1-x Mach-Zehnder interferometer,”
Opt. Lett., 17
(24), 15
(1992). https://doi.org/10.1364/OL.17.001812 Google Scholar
R. A. Soref and B. R. Bennett,
“Electro-optical effects in silicon,”
IEEE J. Quantum Electron., 23 123
–129
(1987). https://doi.org/10.1109/JQE.1987.1073206 Google Scholar
|