Paper
23 October 2018 Liquid level measurements using a multi-notched plastic optical fiber
Author Affiliations +
Abstract
The plastic optical fiber (POF) with a multi-notched structure was used for liquid level measurement. The multi-notched structure was fabricated on the POFs by a die-press-print method. When the notched structure was immerged by the liquid, the transmitted light power of the POF probe could be changed. So, this can be used as a liquid level sensor. The influence of the structure parameters on the sensor performances was investigated experimentally. Experimental results show that the sensitivity can reach to 0.0457/mm with a resolution of 1 mm, and the sensor resolution is flexible. The sensor is simple structure and easy fabrication, and it is a low cost solution for the liquid level measurement.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chuanxin Teng, Hongchang Deng, Houquan Liu, Shijie Deng, Hongyan Yang, Ronghui Xu, and Libo Yuan "Liquid level measurements using a multi-notched plastic optical fiber", Proc. SPIE 10821, Advanced Sensor Systems and Applications VIII, 108211U (23 October 2018); https://doi.org/10.1117/12.2502197
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Polymer optical fibers

Sensor performance

Optical fibers

Back to Top