Paper
29 March 2019 Numerical study of molten pool dynamics and thus bur formation in laser drilling of metals
Author Affiliations +
Proceedings Volume 11046, Fifth International Symposium on Laser Interaction with Matter; 110461L (2019) https://doi.org/10.1117/12.2523876
Event: Fifth International Symposium on Laser Interaction with Matter, 2018, Changsha, China
Abstract
A 2D numerical model is developed to investigate the transient dynamics of molten pool and thus the bur formation mechanism in millisecond pulsed laser drilling process. The model features the utilization of the sharp interface method for accurate consideration of the complex boundary conditions on the hole wall and a comprehensive hydrodynamic calculation for both the gaseous and liquid phases. The model gives good prediction of the bur phenomena, and more importantly, provides detailed information regarding the multi-phase interaction and its effects on hole dynamics, also on the bur formation. It is shown that different substrate can cause different coupling effects between the vapor plume and molten pool and hence produce holes of different shapes. The model gives a basic study of the bur formation during the ablation process of different metals and shows a virtual technique for the visual of the movement of melt and vapor. And the obtained results show good qualitative correspondence with experimental data.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tingzhong Zhang, Jin Li, Wei Liu, and Jian Lu "Numerical study of molten pool dynamics and thus bur formation in laser drilling of metals", Proc. SPIE 11046, Fifth International Symposium on Laser Interaction with Matter, 110461L (29 March 2019); https://doi.org/10.1117/12.2523876
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser drilling

Interfaces

Aluminum

Metals

Titanium

Laser processing

Liquids

Back to Top