Paper
3 June 2019 Electrospark alloying of zirconium and subsequent induction heat treatment
Author Affiliations +
Proceedings Volume 11065, Saratov Fall Meeting 2018: Optical and Nano-Technologies for Biology and Medicine; 110651F (2019) https://doi.org/10.1117/12.2523114
Event: International Symposium on Optics and Biophotonics VI: Saratov Fall Meeting 2018, 2018, Saratov, Russian Federation
Abstract
In the study, morphology, composition, and hardness of the coatings formed by electrospark alloying (ESA) of titanium with zirconium and subsequent induction heat treatment were considered. The possibility of forming coatings with a maximum size of oxide crystals of 8.9±3.8 μm and an open porosity reaching 58 % was established. The morphology parameters depend on the modes of electrospark alloying and heat treatment. There was a decrease in zirconium content in the coating composition from 21.9 to 1.1 at.% when the temperature and duration of induction treatment were increased. Maximum hardness equalled 10.3±0.3 GPa.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir A. Koshuro "Electrospark alloying of zirconium and subsequent induction heat treatment", Proc. SPIE 11065, Saratov Fall Meeting 2018: Optical and Nano-Technologies for Biology and Medicine, 110651F (3 June 2019); https://doi.org/10.1117/12.2523114
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Titanium

Zirconium

Oxides

Heat treatments

Oxidation

Crystals

Scanning electron microscopy

Back to Top