Glass-made adjustable integration mold for x-ray optics: experimental feasibility campaign

L. Losi; M. Civitani; S. Basso; M. Lavagna; G. Pareschi

doi:10.1117/12.2529444

19 September 2019 Glass-made adjustable integration mold for x-ray optics: experimental feasibility campaign

L. Losi, M. Civitani, S. Basso, M. Lavagna, G. Pareschi

Author Affiliations +

Proceedings Volume 11119, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IX; 111190V (2019) https://doi.org/10.1117/12.2529444
Event: SPIE Optical Engineering + Applications, 2019, San Diego, California, United States

Abstract

Cold Slumping Glass Optics is a cost-effective technique to realize segmented X-ray optics. It is based on the replica approach: very thin flat glass foils are shaped to theoretical form by means of integration molds and fixed into stacks by means of ribs. As the theoretical shape of each of the layer depends on the radius of curvature inside the assembly, in principle different integration molds are needed to realize a stack. A worthwhile solution would be the usage of a single adjustable mold with and ‘optical surface’ to be shaped according to the position of the plate in the stack. The selection of the optical surface material and the bending strategy are the most relevant points. Glass would give major benefits in terms of thermal coupling with the glass foils, scratch resistance during operations and costs. On the other hand, given the reduced bending capability of the material coupled with its intrinsic fragility, experimental tests are necessary to assess the feasibility of the solution. In this paper we present the design and the implementation study as realized by the PoliMI-DAER. An experimental test campaign has been carried out beside the theoretical studies, to validate numerical models and obtain feedbacks from an early implementation. The test campaign is expounded along with the analysis of the results. A preliminary comparison with the numerical simulations is given.

Citation Download Citation

L. Losi, M. Civitani, S. Basso, M. Lavagna, and G. Pareschi "Glass-made adjustable integration mold for x-ray optics: experimental feasibility campaign", Proc. SPIE 11119, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IX, 111190V (19 September 2019); https://doi.org/10.1117/12.2529444

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
13 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Glasses

Mirrors

X-ray optics

Numerical simulations

X-rays

Particle swarm optimization

Titanium

Show All Keywords

Keywords/Phrases

Search In:

Publication Years