Paper
20 December 2019 Calibration method for a laser-based alignment system
Author Affiliations +
Proceedings Volume 11209, Eleventh International Conference on Information Optics and Photonics (CIOP 2019); 112090X (2019) https://doi.org/10.1117/12.2543016
Event: Eleventh International Conference on Information Optics and Photonics (CIOP 2019), 2019, Xi'an, China
Abstract
In rotating machines, misaligned shafts increase vibrations and friction, which can increase the energy consumption considerably and cause premature bearing and seal damage. Laser-based alignment systems can realize quick shaft alignment with high accuracy, consisting of laser transmitting unit, charge-coupled device (CCD) or position sensitive detector (PSD) receiving unit and display unit. Their resolution can reach 1 μm or higher, and the accuracy can be even up to ± (0.5%|L| + 1 resolution). In the paper, the principle of a laser-based alignment system is presented. In order to calibrate laser-based alignment systems, a set of measurement device is established. The receiving unit is fixed on a high precision one-dimensional linear stage, while the transmitting unit remains stationary. So, the relative displacement between the two units can be measured. A laser interferometer is used as the standard value of the linear stage displacement, which is traceable to the definition of meter. The layout of the calibration system is complied with Abbe's principle, reducing the measurement error. In addition, several key influencing factors for calibration are given. At last, the uncertainty of the calibration result is analyzed. The result indicates that the calibration apparatus is practical and efficient during the routine work.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoxuan Xu, Yanhui Kang, Zurong Qiu, and Binghe Wang "Calibration method for a laser-based alignment system", Proc. SPIE 11209, Eleventh International Conference on Information Optics and Photonics (CIOP 2019), 112090X (20 December 2019); https://doi.org/10.1117/12.2543016
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Laser systems engineering

Sensors

Calibration

Reflectors

Optical alignment

RELATED CONTENT

Theory And Application Of Laser Interferometer Systems
Proceedings of SPIE (December 25 1979)
A method for the calibration of step gauges
Proceedings of SPIE (October 13 2006)
Automated calibration system for laser interferometers
Proceedings of SPIE (November 20 2003)
Novel design of a one-dimensional measurement probe
Proceedings of SPIE (October 22 2001)

Back to Top