Poster + Presentation + Paper
5 March 2021 Effect of the thermal rise time of diode pump modules on the cold-start turn-on time of a Yb-doped fiber amplifier
Author Affiliations +
Conference Poster
Abstract
Beam-combinable, high-power, narrow-linewidth Yb-doped fiber amplifiers are presently being evaluated as high energy laser weapons where the rapid turn-on of the amplifiers is critical. These amplifiers are optically pumped at the narrow 976nm, high-absorption peak of ytterbium. The fiber amplifier turns on when the emission spectra of the diode pump modules significantly overlap the 976nm Yb absorption peak. The thermal wavelength tuning behavior of two types of laser diode sources was analyzed to predict the cold-start turn-on-time of a fiber amplifier. Turn-on-times of ~4ms and ~4s were predicted for a fiber amplifier employing a laser diode bar directly attached to a micro-channel cooler and a single emitter package cooled by a cold plate, respectively.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Dogan, R. H. Chin, J. H. Jacob, and A. K. Chin "Effect of the thermal rise time of diode pump modules on the cold-start turn-on time of a Yb-doped fiber amplifier", Proc. SPIE 11665, Fiber Lasers XVIII: Technology and Systems, 1166526 (5 March 2021); https://doi.org/10.1117/12.2576715
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermal effects

Fiber amplifiers

Diodes

Semiconductor lasers

Ytterbium

Optical amplifiers

Optical pumping

RELATED CONTENT

High-power single-frequency fiber lasers
Proceedings of SPIE (May 04 1999)
Multi spectral lidar (MSL)
Proceedings of SPIE (October 31 2005)
Model results of Er-Yb double clad fiber amplifier
Proceedings of SPIE (September 10 2007)

Back to Top