Paper
13 December 2021 Interested region selection and super-resolution reconstruction of depth image for scanning lidar
Author Affiliations +
Proceedings Volume 12075, 10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Intelligent Sensing Technologies and Applications; 1207502 (2021) https://doi.org/10.1117/12.2603943
Event: Tenth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2021), 2021, Chengdu, China
Abstract
Scanning lidar scans the target region point-by-point and measures the time of flight (TOF) of laser signal at each point to obtain the 3D information of the target surface. By using fixed size of scanning spot, the resolution of reconstructed depth image is consistent with the number of scanning points. Therefore, traditional scanning lidar is hardly to achieve high resolution and scanning efficiency simultaneously. Aimed to address this issue, we propose a method of interested region selection and depth image super-resolution reconstruction. By constructing a simulation target region with 10 m × 10 m, the proposed method is used to scan this region. The position of the interested region is obtained by scanning the full field of view (FOV) with a large spot. Then the interested region with 4 m × 8 m is fine scanned with reduced scanning spot. By using the super-resolution reconstruction method of depth image, the resolution of the depth image obtained by fine scanning with 40 × 80 points is increased by two times. And the depth image of the interested region with 80 × 160 pixels is obtained. The simulation result shows that the lidar based on this method can give consideration to both high scanning efficiency and the resolution of reconstructed depth image.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ao Yang, Jie Cao, Zhijun Li, Yang Cheng, and Qun Hao "Interested region selection and super-resolution reconstruction of depth image for scanning lidar", Proc. SPIE 12075, 10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Intelligent Sensing Technologies and Applications, 1207502 (13 December 2021); https://doi.org/10.1117/12.2603943
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Super resolution

LIDAR

3D modeling

3D acquisition

3D image reconstruction

Clouds

Image resolution

Back to Top