Low-noise high-dynamic-range single-photon avalanche diodes with integrated PQAR circuit in a standard 55nm BCD process

Pouyan Keshavarzian; Francesco Gramuglia; Ekin Kizilkan; Claudio Bruschini; Shyue Seng Tan; Michelle Tng; Daniel Chong; Elgin Quek; Myung-Jae Lee; Edoardo Charbon

doi:10.1117/12.2618349

30 May 2022 Low-noise high-dynamic-range single-photon avalanche diodes with integrated PQAR circuit in a standard 55nm BCD process

Pouyan Keshavarzian, Francesco Gramuglia, Ekin Kizilkan, Claudio Bruschini, Shyue Seng Tan, Michelle Tng, Daniel Chong, Elgin Quek, Myung-Jae Lee, Edoardo Charbon

Author Affiliations +

Proceedings Volume 12089, Advanced Photon Counting Techniques XVI; 120890B (2022) https://doi.org/10.1117/12.2618349
Event: SPIE Defense + Commercial Sensing, 2022, Orlando, Florida, United States

Abstract

Single-photon avalanche diode (SPAD) based sensors and systems enable a variety of applications in biomedical, automotive, consumer, and security domains. While several established standard technologies, which can facilitate the design of SPAD-based systems are already in existence, challenges remain for the development of deep sub-micron monolithic integration of circuits and SPADs. In this work, we present SPADs along with pixel circuits in a standard GF 55 nm BCDL process. Two different designs demonstrate the flexibility allowed by the technology for a variety of applications. Both shallow and deep junction SPADs present excellent noise performance of less than 1 cps/μm2 at 3 V excess bias. An integrated passive-quench active-recharge (PQAR) circuit is used in conjunction with the SPADs, which enables a dead time of less than 2 ns, easily allowing for high dynamic range applications that require < 100 Mcps such as quantum communication and information technologies. The deep and shallow junction SPADs demonstrate an afterpulsing probability of < 0.5 % and < 2 % at 3V excess bias, respectively. The dead time is adjustable through analog control of the active-recharge circuit, allowing for afterpulsing reduction to below 0.1 % while maintaining Mcps operation. The shallow junction, which has a breakdown voltage of about 18 V and a peak sensitivity at 430 nm is particularly interesting for applications requiring low supply voltage, whereas the deep SPAD, which demonstrates < 4 % photon detection probability (PDP) at 940 nm, can be implemented in LiDAR sensors that require enhanced sensitivity at near-infrared (NIR) wavelengths. The measured timing jitter of both SPADs is < 50 ps FWHM at 3 V excess bias and 780 nm.

Conference Presentation

Citation Download Citation

Pouyan Keshavarzian, Francesco Gramuglia, Ekin Kizilkan, Claudio Bruschini, Shyue Seng Tan, Michelle Tng, Daniel Chong, Elgin Quek, Myung-Jae Lee, and Edoardo Charbon "Low-noise high-dynamic-range single-photon avalanche diodes with integrated PQAR circuit in a standard 55nm BCD process", Proc. SPIE 12089, Advanced Photon Counting Techniques XVI, 120890B (30 May 2022); https://doi.org/10.1117/12.2618349

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available