Obtaining cryogenic molecular transport data for analysis

Elaine M. Stewart; Eve M. Wooldridge; Michael S. Woronowicz; Kelly Henderson-Nelson; George Meadows

doi:10.1117/12.2634188

3 October 2022 Obtaining cryogenic molecular transport data for analysis

Elaine M. Stewart, Eve M. Wooldridge, Michael S. Woronowicz, Kelly Henderson-Nelson, George Meadows

Proceedings Volume 12224, Space Systems Contamination: Prediction, Control, and Performance 2022; 1222404 (2022) https://doi.org/10.1117/12.2634188
Event: SPIE Optical Engineering + Applications, 2022, San Diego, California, United States

Abstract

The James Webb Space Telescope (JWST) has a primary mirror, made of 18 segments, and a secondary mirror (SM) that are used to direct the light of desired targets. After launch, the secondary mirror assembly (SMA) is stowed for approximately 10 days and is subject to molecular contamination outgassing from the cavity of the secondary mirror support structure (SMSS) in-board hinge (IBH) which contains cables, motors, resolvers, and coatings. The main concern during this period before SMA deployment is the accumulation of ice due to the lack of a heater on the SMA. The temperature differentials between the IBH surfaces and SMA could cause redistribution of water vapor contamination. To address this concern, single layer insulation (SLI) was reconfigured to direct the vent path of IBH outgassing sources away from the SM. Two separate thermal vacuum (TVAC) tests were performed to quantify this contamination: a Z307 ASTM E 1559 materials test of the radiator paint used on the motor of the IBH and a separate test on the hinge motor from the primary mirror backplane assembly (PMBA) qualification engineering test unit (ETU). The PMBA ETU hinge was similar in design to the IBH. These tests approximately followed the predicted SMA predeployment thermal environment. To quantify source rates in case of a leak in the new SLI enclosure or baffle, the motor and resolver sides were separated, and quartz crystal microbalances (QCM) were used to measure the deposition of water. The SLI redesign and implementation and outgassing measurements to understand leak effects from the IBH were essential to mitigate the deposition of contamination on the SMA.

Conference Presentation

Citation Download Citation

Elaine M. Stewart, Eve M. Wooldridge, Michael S. Woronowicz, Kelly Henderson-Nelson, and George Meadows "Obtaining cryogenic molecular transport data for analysis", Proc. SPIE 12224, Space Systems Contamination: Prediction, Control, and Performance 2022, 1222404 (3 October 2022); https://doi.org/10.1117/12.2634188

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available