Paper
1 August 2022 Controller design of a system with delay link
Author Affiliations +
Proceedings Volume 12257, 4th International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2022); 1225744 (2022) https://doi.org/10.1117/12.2640172
Event: 4th International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2022), 2022, Guangzhou, China
Abstract
System simulation was carried out using a combination of theoretical knowledge and Matrix Laboratory (MATLAB), exploiting the known open-loop transfer function and given conditions. The Bode diagram that meets the initial conditions was generated, parameters of the system were calculated, and the accuracy of the results was verified. A corrector was added to the forward path, the transfer function associated with the correction network was calculated, and the root locus of the uncorrected and corrected systems was sketched. Subsequently, the corrected system was analyzed following the process of simulation debugging. The problems associated with the design process were analyzed under real-life conditions based on the simulation test results obtained using MATLAB. The direction of future research was predicted by analyzing the obtained results.It can improve the reaction rate of the system and improve the performance of the system by means of correction. Hence it is necessary to add appropriate devices for system correcting.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haoyi Liu "Controller design of a system with delay link", Proc. SPIE 12257, 4th International Conference on Information Science, Electrical, and Automation Engineering (ISEAE 2022), 1225744 (1 August 2022); https://doi.org/10.1117/12.2640172
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
MATLAB

Control systems

Analytical research

Testing and analysis

Computer programming

Device simulation

Mathematical modeling

Back to Top