Poster + Paper
9 March 2023 An optically transparent focused P(VDF-TrFE) transducer for Photoacoustic Microscopy (PAM)
Author Affiliations +
Conference Poster
Abstract
This paper reports a new optically transparent focused P(VDF-TrFE) (poly(vinylidene fluoride-co-trifluoroethylene)) transducer for photoacoustic microscopy (PAM), which is fabricated by a new process based on pre-cutting and direct-lamination. Compared with the previous fabrication process, it is simpler, and makes it possible to achieve a high numerical aperture (NA) without stretching the (brittle) piezoelectric film. For demonstration, a prototype transducer has been fabricated with a 10-μm-thick 70/30 P(VDF-TrFE) film laminated onto a plano-concave glass lens with an NA of 0.64. Experimental characterization shows that the transducer has an optical transmittance of 88.6% (@ 532 nm), an acoustic center frequency and -3 dB bandwidth of 24 MHz and 29 MHz, respectively. Using the new optically transparent focused P(VDF-TrFE) transducer, an optical-resolution PAM (OR-PAM) imaging setup has been built and imaging experiments have been conducted on different targets. The experimental results show the optically transparent focused P(VDF-TrFE) transducer could be useful for the development of new PAM systems for different imaging applications.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cheng Fang, Zijie Zhao, Jie Fang, and Jun Zou "An optically transparent focused P(VDF-TrFE) transducer for Photoacoustic Microscopy (PAM)", Proc. SPIE 12379, Photons Plus Ultrasound: Imaging and Sensing 2023, 123791E (9 March 2023); https://doi.org/10.1117/12.2648118
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Acoustics

Ferroelectric polymers

Glasses

Spherical lenses

Fabrication

Electrodes

Back to Top