Presentation + Paper
12 March 2024 Compact, high power laser beam CMOS profiler with less than -8 inherent optical density
Michael Scaggs, Gil Haas
Author Affiliations +
Abstract
Employing two novel beam attenuation and ghost suppression schemes, a compact, high-power laser beam CMOS-based profiler has been realized. The traditional method of attenuation employs a multitude of crossed polarized wedge prism pairs along with other mirror and neutral density filters to get the intensity of the laser beam on the CMOS without overexposing the sensor. In general, the CMOS requires low microwatts of power to avoid over exposure of the sensor. This means that for 1 kilowatt of continuous wave laser power, the attenuation, prior to the sensor, needs to be in the -8 to -9 optical density range. A pair of uncoated, fused silica wedge prisms have an equivalent optical density of about -2.8. Therefore, three pairs of wedge prisms would be required for an -8 to -9 optical density equivalent. The implementation of three sets of wedge prisms requires a long optical path with no less than six optics to achieve the desired attenuation. In the current work, the number of optics required is only 3 to achieve the same level of attenuation and is a fraction of the size in contrast to the traditional method.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Michael Scaggs and Gil Haas "Compact, high power laser beam CMOS profiler with less than -8 inherent optical density", Proc. SPIE 12871, Laser Resonators, Microresonators, and Beam Control XXVI, 128710B (12 March 2024); https://doi.org/10.1117/12.3001839
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Attenuation

Reflection

Absorbance

Fiber lasers

CMOS sensors

High power lasers

Windows

Back to Top