A stiffness modeling method for redundant degree-of-freedom manipulator considering gravity

Dong Yang; Jiajin Che; Ming Han; Jinyue Liu

doi:10.1117/12.3025807

1 April 2024 A stiffness modeling method for redundant degree-of-freedom manipulator considering gravity

Dong Yang, Jiajin Che , Ming Han, Jinyue Liu

Proceedings Volume 13081, Third International Conference on Advanced Manufacturing Technology and Electronic Information (AMTEI 2023); 130810Z (2024) https://doi.org/10.1117/12.3025807
Event: 2023 3rd International Conference on Advanced Manufacturing Technology and Electronic Information (AMTEI 2023), 2023, Tianjin, China

Abstract

Aiming at the problem that the large weight of the construction robot cannot be ignored in the process of stiffness modeling, this paper proposes a stiffness modeling method of non-rotational drive joint redundant degree of freedom manipulator considering gravity. Firstly, the structural characteristics of the redundant degree of freedom manipulator are introduced, and the inverse kinematics is solved by using the self-motion characteristics of the redundant degree of freedom manipulator. Then, the force and deformation analysis of the parallelogram mechanism is carried out by using the equivalent principle of the force system and the translation theorem of the force, and the stiffness modeling is carried out based on the principle of virtual work. Finally, considering the gravity factor, the overall force and deformation analysis of the manipulator is completed, and the comprehensive stiffness model of the manipulator is established. The stiffness is analyzed according to the self-motion characteristics of the manipulator. The results show that under the influence of gravity and external force, the stiffness difference of the manipulator with different redundant angles at the same position can reach 240 %, and the proportion of gravity factor in deformation can reach 72 %. The research in this paper reveals the significant differences in the stiffness of the manipulator under different redundant angles. The established stiffness model is more in line with the actual situation and lays a foundation for further optimization research.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Dong Yang, Jiajin Che , Ming Han, and Jinyue Liu "A stiffness modeling method for redundant degree-of-freedom manipulator considering gravity", Proc. SPIE 13081, Third International Conference on Advanced Manufacturing Technology and Electronic Information (AMTEI 2023), 130810Z (1 April 2024); https://doi.org/10.1117/12.3025807

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Deformation

Modeling

Matrices

Kinematics

Process modeling

Mechanical engineering

Motion analysis

Show All Keywords

Keywords/Phrases

Search In:

Publication Years