Advanced portable four-wavelength NIR analyzer for rapid chemical composition analysis

Jouko Malinen; Timo S. Hyvarinen

doi:10.1117/12.47139

1 September 1991 Advanced portable four-wavelength NIR analyzer for rapid chemical composition analysis

Jouko Malinen, Timo S. Hyvarinen

Proceedings Volume 1510, Chemical and Medical Sensors; (1991) https://doi.org/10.1117/12.47139
Event: ECO4 (The Hague '91), 1991, The Hague, Netherlands

Abstract

This paper discusses the requirements for a portable infrared analyzer and presents the design of a four wavelength NIR analyzer utilizing the integrated multichannel detector technique for wavelength separation and detection. This technique, together with an electrically modulated miniature tungsten filament source and surface mount electronics manufacturing, provides a compact, rugged handheld instrument construction without any moving parts. Improved accuracy and short stabilization time is achieved through a combination of thermoelectric temperature stabilization in the four channel detector and a calculated signal compensation for the residual temperature error. Parallel analog phase sensitive detection of the detector signal maximizes the S/N ratio and maintains the simultaneity of the measurement. All composition calculations are performed in a microcomputer built inside the analyzer. The weight of the prototype analyzer is about 1 kg and a NiCd battery pack provides capacity for hundreds of single measurements or about 3 hours of continuous operation. Two prototype instruments have been fabricated with optimized NIR wavelengths for the moisture measurement of milled fuel peat on production fields. The accuracy of digitized two-wavelength signal ratios were tested in the laboratory over time and against temperature. Full accuracy is achieved in 10 seconds after switch-on and the maximum short time peak-to-peak variation in the signal ratios is 0.2%. The errors due to temperature fluctuations in the range from +2 to +50 degree(s)C are between -0.4 to +0.6%. The instruments were calibrated using 102 samples of Finnish milled fuel peat. the cross-validation testing of calibration gave a standard deviation of 1.6% (moisture by weight) compared to the reference method. Other applications for the analyzer are being planned in wood processing and chemical industries as well as in agriculture.

Citation Download Citation

Jouko Malinen and Timo S. Hyvarinen "Advanced portable four-wavelength NIR analyzer for rapid chemical composition analysis", Proc. SPIE 1510, Chemical and Medical Sensors, (1 September 1991); https://doi.org/10.1117/12.47139

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available