Paper
1 January 1992 Distributed temperature sensors for single-mode fibers
Takao Shiota, Fumio Wada
Author Affiliations +
Abstract
Single mode fibers are being installed in nearly all communication lines. For the purpose of maintenance and observation of line, data of the installed fiber condition is needed. Distributed temperature sensing for single mode fiber is expected in this field. Special wavelength light sources are necessary to measure the temperature distribution by Raman ratiometry in order to avoid the single mode fiber's cut-off wavelength. Distributed temperature sensing of the single mode fiber is perceived using fiber Raman laser. Fiber Raman laser is pumped by the LD- pumped solid-state laser source. 1400 nm pulse light is coupled into a single mode fiber and the 1320 Anti-Stokes and 1500 nm Stokes light are detected to calculate the temperature. Temperature accuracy is +/- 2 degree(s)C with the average time of 3 min and the maximum measurable range is 3 km.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takao Shiota and Fumio Wada "Distributed temperature sensors for single-mode fibers", Proc. SPIE 1586, Distributed and Multiplexed Fiber Optic Sensors, (1 January 1992); https://doi.org/10.1117/12.56503
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Raman spectroscopy

Single mode fibers

Fiber lasers

Raman scattering

Fiber optics sensors

Sensors

Temperature metrology

Back to Top