Paper
5 March 1993 Loss-compensation technique using a split-spectrum approach for optical fiber air-gap intensity-based sensors
Anbo Wang, Mark S. Miller, Michael F. Gunther, Kent A. Murphy, Richard O. Claus
Author Affiliations +
Proceedings Volume 1795, Fiber Optic and Laser Sensors X; (1993) https://doi.org/10.1117/12.141268
Event: Fibers '92, 1992, Boston, MA, United States
Abstract
A self-referencing technique compensating for fiber losses and source fluctuations in air-gap intensity-based optical fiber sensors is described and demonstrated. A resolution of 0.007 micron has been obtained over a measurement range of 0-250 microns for an intensity-based displacement sensor using this referencing technique. The sensor is shown to have minimal sensitivity to fiber bending losses and variations in the LED input power. A theoretical model for evaluation of step-index multimode optical fiber splice is proposed. The performance of the sensor as a displacement sensor agrees well with the theoretical analysis.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anbo Wang, Mark S. Miller, Michael F. Gunther, Kent A. Murphy, and Richard O. Claus "Loss-compensation technique using a split-spectrum approach for optical fiber air-gap intensity-based sensors", Proc. SPIE 1795, Fiber Optic and Laser Sensors X, (5 March 1993); https://doi.org/10.1117/12.141268
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Mirrors

Light emitting diodes

Optical filters

Signal attenuation

Electronic filtering

RELATED CONTENT


Back to Top