Paper
10 June 1994 Fabrication of high-performance GaAs/AlGaAs optical phase modulators for microwave/photonic integrated circuits
Stanley H. Kravitz, G. Allen Vawter, Vincent M. Hietala, Morris Burt Snipes Jr., Marcelino G. Armendariz, Richard Franklin Carson, B. Eugene Hammons, Ronald E. Leibenguth
Author Affiliations +
Abstract
A high-speed distributed electrode phase modulator has been designed and fabricated. The processing of this device presented many challenges: (1) smooth rib waveguides etched to an accuracy of +/- 200angstroms; (2) polyimide planarization of 5micrometers step heights, with vias patterned as small as 1.6 micrometers ; (3) contact metalization with resistivities as low as 1 X 10-6(Omega) -cm2; (4) coplanar n and p gold contacts 2.5 micrometers thick, with a 0.5 micrometers gap between contacts; (5) ion- implantation to achieve both electrical and optical isolation. A brief description of how each of these processes have been accomplished will be presented. The epitaxial growth structure of this device will be discussed, including SEM cross-sections of the completed device.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stanley H. Kravitz, G. Allen Vawter, Vincent M. Hietala, Morris Burt Snipes Jr., Marcelino G. Armendariz, Richard Franklin Carson, B. Eugene Hammons, and Ronald E. Leibenguth "Fabrication of high-performance GaAs/AlGaAs optical phase modulators for microwave/photonic integrated circuits", Proc. SPIE 2155, Optoelectronic Signal Processing for Phased-Array Antennas IV, (10 June 1994); https://doi.org/10.1117/12.177393
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Integrated optics

Modulators

Integrated circuits

Electrodes

Gold

Scanning electron microscopy

Waveguides

RELATED CONTENT

Anodic gold corrosion in optical modulators
Proceedings of SPIE (May 15 2001)
Integrated Optics-A Possible Solution For The Fiber Gyroscope
Proceedings of SPIE (December 15 1978)
High-Speed Mach-Zehnder Modulator
Proceedings of SPIE (November 30 1983)

Back to Top