Surface inspection by optical triangulation

Manuel Filipe M. Costa

doi:10.1117/12.194314

15 November 1994 Surface inspection by optical triangulation

Manuel Filipe M. Costa

Proceedings Volume 2248, Optical Measurements and Sensors for the Process Industries; (1994) https://doi.org/10.1117/12.194314
Event: Optics for Productivity in Manufacturing, 1994, Frankfurt, Germany

Abstract

We describe an optical noncontact microtopographer based on an active, discrete triangulation procedure, showing that this kind of triangulation based surface inspection system can be applied not only to large distance range sensing but also to smaller samples or smoother surfaces with resolutions that can be driven down to the sub-micron range. In our system the topographic information is obtained from the horizontal shift incurred by the bright spot created by an oblique collimated light beam on a surface when it is displaced vertically. A laser beam is focused onto a small diffraction limited spot on the surface and is made to scan it over the desired region. The horizontal position of the bright spot is perpendicularly imaged onto a linescan camera and the information about the individual detectors that are activated, above a certain controllable intensity threshold level, is used to compute the corresponding horizontal spot's shift on the reference plane. Thus we can compute the distance between the surface and a reference plane at each sampled point. A map of the surface topography can then be built and statistical surface characterization parameters may be calculated. Our laboratory setup's configuration is quite versatile and it has been used for different inspection tasks like: thickness measures and relief mapping of polyethylene films and thin sputtered copper, tin dioxide and silver films, several kinds of fabrics; and roughness measure and topographic inspection of polyethylene molds and graphite samples. Also presented are the portable version of our system and the setup for large distance dimensional assessment.

Citation Download Citation

Manuel Filipe M. Costa "Surface inspection by optical triangulation", Proc. SPIE 2248, Optical Measurements and Sensors for the Process Industries, (15 November 1994); https://doi.org/10.1117/12.194314

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available