Paper
25 September 1995 Applications of the extrinsic Fabry-Perot interferometer
Jonathan A. Greene, Tuan A. Tran, Kent A. Murphy, Michael F. Gunther, Russell G. May, Richard O. Claus
Author Affiliations +
Proceedings Volume 2510, Fiber Optic and Laser Sensors XIII; (1995) https://doi.org/10.1117/12.221697
Event: European Symposium on Optics for Environmental and Public Safety, 1995, Munich, Germany
Abstract
We discuss two of the latest demonstrations of the extrinsic Fabry-Perot interferometer (EFPI) sensor, namely a novel silica fiber-based hydrogen sensor and a high-temperature, sapphire fiber-based displacement sensor for surface strain measurements at temperatures up to 2000 degrees C. To modify the EFPI sensor for the detection of hydrogen, the sensor is sputter coated with a 2 micrometers layer of palladium. Based on the signal-to-noise ratio of the sensor, a minimum detectable hydrogen concentration of 35 ppm has been obtained. For displacement measurements at temperatures above the melting point of silica, we discuss results using a sapphire fiber EFPI sensing head demodulated using white light scanning Michelson interferometer.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonathan A. Greene, Tuan A. Tran, Kent A. Murphy, Michael F. Gunther, Russell G. May, and Richard O. Claus "Applications of the extrinsic Fabry-Perot interferometer", Proc. SPIE 2510, Fiber Optic and Laser Sensors XIII, (25 September 1995); https://doi.org/10.1117/12.221697
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Sapphire

Hydrogen

Fiber optics sensors

Palladium

Temperature metrology

Fabry–Perot interferometry

Back to Top