Modifications for soft x-ray contact microscopy: quantification of carbon density discrimination and stereo imaging

Anthony D. Stead; Anton M. Page; Robin A. Cotton; David Neely; Roland M. Bagby; Eisuke Miura; Toshihisa Tomie; S. Shimizu; Toshikazu Majima; Peter A. F. Anastasi; Thomas W. Ford

doi:10.1117/12.220980

18 September 1995 Modifications for soft x-ray contact microscopy: quantification of carbon density discrimination and stereo imaging

Anthony D. Stead, Anton M. Page, Robin A. Cotton, David Neely, Roland M. Bagby, Eisuke Miura, Toshihisa Tomie, S. Shimizu, Toshikazu Majima, Peter A. F. Anastasi, Thomas W. Ford

Author Affiliations +

Proceedings Volume 2523, Applications of Laser Plasma Radiation II; (1995) https://doi.org/10.1117/12.220980
Event: SPIE's 1995 International Symposium on Optical Science, Engineering, and Instrumentation, 1995, San Diego, CA, United States

Abstract

Soft x-ray contact microscopy successfully images hydrated biological material with resolution superior to light microscopy. Nanosecond laser pulses record the image before movement or radiation damage can occur, eliminating concerns of fixation-induced artifacts (cf electron microscopy). X-rays make the recording polymethyl methacrylate (PMMA) photoresist more soluble, thus a contour map of x-ray absorbency is produced in which relative heights, measured by atomic force microscopy, reflect specimen carbon density. Until now quantification of the carbon-density differences was impossible, neither has the minimum carbon density difference which is detectable been determined. Since biological specimens are composed of structures differing only marginally in carbon density the discrimination between carbon densitites is critical. Using SI₃N₄ windows coated with differing carbon thicknesses we have followed the rate of PMMA dissolution in order to produce calibration curves from which specimen carbon density can be determined. These experiments have also attempted to determine the minimum detectable carbon density difference. When using relatively thick (< 5micrometers ) specimens image interpretation can be difficult as spatially separated structures in the original specimen become superimposed in the x-ray image. To provide spatial resolution in three dimensions we are developing a soft x-ray stereo imaging system. Using two laser plasma x-ray sources and contoured photoresists we have obtained two simulanteous images of the same specimen from different angles. E-beam lithography, cutting and imprinting have been tested as means of producing contoured photoresists. The merits of each will be discussed and preliminary stereo images of hydrated biological specimens presented.

Citation Download Citation

Anthony D. Stead, Anton M. Page, Robin A. Cotton, David Neely, Roland M. Bagby, Eisuke Miura, Toshihisa Tomie, S. Shimizu, Toshikazu Majima, Peter A. F. Anastasi, and Thomas W. Ford "Modifications for soft x-ray contact microscopy: quantification of carbon density discrimination and stereo imaging", Proc. SPIE 2523, Applications of Laser Plasma Radiation II, (18 September 1995); https://doi.org/10.1117/12.220980

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available