Paper
13 September 1995 Vison guidance of a laser profiler for monitoring refractory lining wear in steel mills
Heikki J. Ailisto, Risto S. Mitikka, Ilkka Moring, Hannu Jokinen
Author Affiliations +
Proceedings Volume 2598, Videometrics IV; (1995) https://doi.org/10.1117/12.220905
Event: Photonics East '95, 1995, Philadelphia, PA, United States
Abstract
A laser rangefinder-based optical coordinate measurement system used for monitoring refractory lining wear in steel mills has been equipped with a vision system to improve its operative and performance characteristics. The 3D shape of the refractory lining is measured after renewal at the beginning of a campaign and these data are stored as a reference. During the campaign the lining is measured and the results are compared against the reference data in order to minimize risks and optimize lining life. To make the results measured at different times comparable, they must be accurately and reliably transformed to the same coordinate system. This makes the coordinate system setup phase critical for the success of the lining wear monitoring. Other important aspects are the amount of expensive process time taken up by the measurements and work safety aspects. The experimental vision system has been tesetd for automating the corrdinate system setup phase, and improved repeatability and faster operation compared with manual setup was achieved. Tentative tests at a steel mill proved promising, and further development of the vision system is going on.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heikki J. Ailisto, Risto S. Mitikka, Ilkka Moring, and Hannu Jokinen "Vison guidance of a laser profiler for monitoring refractory lining wear in steel mills", Proc. SPIE 2598, Videometrics IV, (13 September 1995); https://doi.org/10.1117/12.220905
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Head

3D metrology

Cameras

Laser optics

Video

Laser applications

Optical testing

RELATED CONTENT

Telepresence for mobile robots in nuclear environments
Proceedings of SPIE (December 17 1996)
Laser beam scanning by mechanical devices and CCD camera
Proceedings of SPIE (December 06 2006)
Optical local strain testing of laser-joined sheet steels
Proceedings of SPIE (March 27 1997)
Approximation-based video tracking system
Proceedings of SPIE (July 01 1991)

Back to Top