Qualitative health monitoring of a steel bridge joint via piezoelectric actuator/sensor patches

John W. Ayres; Craig A. Rogers; Zaffir A. Chaudhry

doi:10.1117/12.238831

22 April 1996 Qualitative health monitoring of a steel bridge joint via piezoelectric actuator/sensor patches

John W. Ayres, Craig A. Rogers, Zaffir A. Chaudhry

Proceedings Volume 2719, Smart Structures and Materials 1996: Smart Systems for Bridges, Structures, and Highways; (1996) https://doi.org/10.1117/12.238831
Event: 1996 Symposium on Smart Structures and Materials, 1996, San Diego, CA, United States

Abstract

This paper presents a qualitative health monitoring technique to be used in real-time damage evaluation of massive complex structures such as bridge joints. The basic principle of the technique is to monitor the structural mechanical impedance which will be changed with the presence of damage. The mechanical impedance variations are monitored by measuring the electrical impedance with a piezoelectric actuator/sensor. This mechanical-electrical impedance relation is due to the electro-mechanical coupling property of piezoelectric materials. This health monitoring technique can be easily adapted to existing structures, since only a small PZT patch is needed, giving the structure the ability to constantly monitor its own structural integrity. This impedance-based method operates at high frequencies (generally above 100 kHz), which enables it to detect incipient type damage, and is not confused by normal operating conditions, vibrations, changes in the structure, or changes in the host external body. This health monitoring technique has only been applied successfully to a variety of light structures. However, the usefulness of the NDE technique for massive structures is uncertain and needs to be investigated. For this purpose, a 500-LB, quarter-scale deck truss bridge joint was built and used in this experimental investigation. The localized sensing area is still observed, but the impedance variations due to incipient damage are slightly different. Nevertheless, by converting the impedance measurements into a scalar damage metric, the real-time implementation of the impedance-based technique has been proven feasible.

Citation Download Citation

John W. Ayres, Craig A. Rogers, and Zaffir A. Chaudhry "Qualitative health monitoring of a steel bridge joint via piezoelectric actuator/sensor patches", Proc. SPIE 2719, Smart Structures and Materials 1996: Smart Systems for Bridges, Structures, and Highways, (22 April 1996); https://doi.org/10.1117/12.238831

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available