Paper
1 May 1996 Design and performance predictions of smart wing for transonic cruise
Fred Austin, William C. Van Nostrand, Michael J. Siclari, Paul Aidala, Robert Clifford
Author Affiliations +
Abstract
The development of aircraft lifting surfaces that change shape to enable relatively shock-free performance throughout a range of design points in the transonic region is described. This type of reduced-drag airfoil can increase range, decrease fuel expenditure, increase cruising speed, increase lift, or accomplish a combination of these desirable effects. Preliminary payoff studies on a Gulfstream III aircraft with a hypothetical smart wing, show that if 1000 lbs. were added to the weight of the aircraft to incorporate smart-wing technology, and the coefficient of drag CD could be decreased by 20 counts (0.0020), 5% less fuel would be required or the range could be increased by 5% with the existing fuel. Airfoil shapes are computed with a stochastic optimization method based on simulated annealing. Drag reduction is presented as a function of flight condition, region of surface control, and number of actuators. Design and development of an experimental TERFENOL-D actuator to provide the variable airfoil shape required for optimum performance are also discussed.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fred Austin, William C. Van Nostrand, Michael J. Siclari, Paul Aidala, and Robert Clifford "Design and performance predictions of smart wing for transonic cruise", Proc. SPIE 2721, Smart Structures and Materials 1996: Industrial and Commercial Applications of Smart Structures Technologies, (1 May 1996); https://doi.org/10.1117/12.239132
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Algorithms

Californium

Magnetism

Stochastic processes

Coastal modeling

Manufacturing

Back to Top