Paper
26 April 1996 Strain and failure sensing by the fiber optic Michelson sensor embedded in composite beam
Chang-Sun Hong, Il-Bum Kwon, Chun-Gon Kim
Author Affiliations +
Abstract
The bending deformation and matrix cracking were investigated by conducting a four-point bending test for a cross-ply composite beam with an embedded fiber optic Michelson sensor. The fiber optic Michelson interferometric sensor was constructed and embedded in the composite beam. The failure of composite beam, due to the matrix cracking, was successfully detected by the fiber optic sensor and the matrix crack in the composite beam was confirmed by an edge replica method. The characteristics of the failure signals from the fiber optic sensor were studied. The strain and failure signals of the composite beam were separated by digital filtering of the signal from the fiber optic sensor. The failure was obviously detectable by the failure signal filtered from the optical signal.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang-Sun Hong, Il-Bum Kwon, and Chun-Gon Kim "Strain and failure sensing by the fiber optic Michelson sensor embedded in composite beam", Proc. SPIE 2779, 3rd International Conference on Intelligent Materials and 3rd European Conference on Smart Structures and Materials, (26 April 1996); https://doi.org/10.1117/12.237114
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Composites

Fiber optics

Optical fibers

Sensors

Digital filtering

Electronic filtering

Back to Top