Paper
24 July 1996 DUV printability of laser repairs on binary and attenuated phase-shift masks
James A. Reynolds, Franklin M. Schellenberg, Michael S. Hibbs, Dennis Hayden
Author Affiliations +
Abstract
Photomask repair is a key technology required for the advancement of semiconductor lithography. Of particular interest is the repair of attenuated phase shift masks (APSM) which appear to have a significant role in extending the life of lithographic equipment and processes. A majority of today's 5X reticles require some type of repair to meet zero defect requirements. A successful repair must add and/or remove materials so the aerial image of the defective site looks, to the printing process, to be identical to that of a nondefective site. In this study, selected defects from an IBM test pattern were removed from a carbon attenuated phase shift mask ("carbon phase mask”) and a conventional binary mask (“chromeonglass mask"). The mask was inspected using an atomic force microscope (AFM) and an aerial image measurement (AIMS) system and were printed at a 248nm wavelength onto silicon wafers. The finished wafers were inspected using a scanning electron microscope (SEM) to determine the printability of repaired sites.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James A. Reynolds, Franklin M. Schellenberg, Michael S. Hibbs, and Dennis Hayden "DUV printability of laser repairs on binary and attenuated phase-shift masks", Proc. SPIE 2793, Photomask and X-Ray Mask Technology III, (24 July 1996); https://doi.org/10.1117/12.245225
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Carbon

Semiconducting wafers

Reticles

Atomic force microscopy

Binary data

Inspection

RELATED CONTENT

Printability of laser mask repairs at deep UV
Proceedings of SPIE (July 03 1995)
Printability of 2D mask quality
Proceedings of SPIE (December 17 2003)
High MEEF reticle inspection strategy
Proceedings of SPIE (September 23 2009)
Printability of laser mask repairs at deep UV
Proceedings of SPIE (December 08 1995)
AIMS-fab SPEC for defect repair and better repair profile
Proceedings of SPIE (December 06 2004)

Back to Top