Paper
25 October 1996 Reliability modeling and testing of optical fiber Bragg sensors for strain measurements
Author Affiliations +
Abstract
Surveillance of facilities and critical structures by monitoring mechanical strength and integrity is necessary for safety in use. Fiber-optic sensors still have poor industrial acceptance due to their lack of demonstrated reliability and long-term stability. Reliability testing for objects with expected life times of 10 to 100 years has to rely on accelerated aging procedures. We report on a series of aging tests of optical fibers and Bragg gratings at elevated temperature, humidity and mechanical stress performed in regard to field applications. Tensile and climate tests were performed with optical fibers embedded in glass fiber reinforced polymers (GFRP) and surface attached to carbon fiber reinforced polymers (CFRP). For surface attached fiber sensors relative humidity was found to be a critical parameter with strong influence on life time. A cable-stayed bridge (Storchenbrucke in Winterthur, CH, still under construction) where for the first time two steel cables are replaced by CFRP cables was equipped with optical-fiber Bragg gratings and standard resistance strain sensors.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Urs J. Sennhauser, Rolf Broennimann, and Philipp M. Nellen "Reliability modeling and testing of optical fiber Bragg sensors for strain measurements", Proc. SPIE 2839, Fiber Optic and Laser Sensors XIV, (25 October 1996); https://doi.org/10.1117/12.255382
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Humidity

Reliability

Optical fibers

Fiber optics sensors

Bridges

Back to Top