Paper
12 May 1998 Damage effect of cw COIL to PV InSb detector
Jinbao Chen, Qisheng Lu, Zhongfu Jiang, Zhiping Jiang, Zejin Liu
Author Affiliations +
Abstract
The performance change of photovoltaic (PV) indium stibium (InSb) detector illuminated by continuous wave (CW) chemical oxygen iodine laser (COIL) with different power density was measured and the damage threshold interval of the detector was achieved to be 26(0.89S) approximately 113(1.4S)W/cm2. Using the integrating sphere technology, the thermal coupling coefficient of InSb crystal material to CW COIL was measured to be 0.664 +/- 0.004. Compared with the theoretical result, the thermal coupling coefficient measured was a little bigger due to the effect of the surface defect of InSb material. The principle and damage mechanism of PV InSb detector was reviewed. The temperature rise and performance change of PV InSb detector illuminated by CW COIL were calculated with 1D thermal model. The calculated results was consistent with the experimental results.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinbao Chen, Qisheng Lu, Zhongfu Jiang, Zhiping Jiang, and Zejin Liu "Damage effect of cw COIL to PV InSb detector", Proc. SPIE 3268, Gas and Chemical Lasers and Intense Beam Applications, (12 May 1998); https://doi.org/10.1117/12.308070
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Photovoltaics

Chemical oxygen iodine lasers

Signal detection

Continuous wave operation

Target detection

Laser damage threshold

Back to Top