Paper
6 August 1998 Loop experiments and simulations for the wavelength division multiplex network signal path
Bernhard N. Strebel, Christoph Caspar, R. Freund
Author Affiliations +
Abstract
The multichannel wavelength division multiplex technique offers the possibility to use the optical fiber amplifier bandwidth for high capacity transmission whereas single channels are routed via optical crossconnects. Linear and nonlinear fiber effects as well as crossconnect characteristics influence the transmission length of the signal path. These effects are illustrated by the transparency length diagram. The basic knowledge for planning future optical networks is achieved from transmission experiments in recirculating fiber loops accompanied by the development of simulation tools. The loop experiments deliver a deeper insight in physical properties of fiber trunks carrying bundles of optical channels. The influence of crossconnects or single components on the signal quality can also be investigated by a repeated loop transit. The experimental results are used to improve a simulation model on the basis of "Ptolemy". This simulation tool permits a prediction of signal quality degradation during transit through a network path. Another important topic of WDM network research are experiments with installed fiber trunks. As a first attempt the experiments on a replica of the Berlin- Darmstadt intercity connection are presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernhard N. Strebel, Christoph Caspar, and R. Freund "Loop experiments and simulations for the wavelength division multiplex network signal path", Proc. SPIE 3552, Fiber Optic Components and Optical Communication II, (6 August 1998); https://doi.org/10.1117/12.318049
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical amplifiers

Single mode fibers

Multiplexers

Transparency

Optical networks

Wavelength division multiplexing

Optical filters

Back to Top