Optical and electrochemical diffusion-based detection of analytes in complex samples using microfabricated flow structures (T-Sensors)

Bernhard H. Weigl; Robert B. Darling; Paul Yager; Jennah Kriebel; Kelly Mayes

doi:10.1117/12.350048

3 June 1999 Optical and electrochemical diffusion-based detection of analytes in complex samples using microfabricated flow structures (T-Sensors)

Bernhard H. Weigl, Robert B. Darling, Paul Yager, Jennah Kriebel, Kelly Mayes

Author Affiliations +

Proceedings Volume 3606, Micro- and Nanofabricated Structures and Devices for Biomedical Environmental Applications II; (1999) https://doi.org/10.1117/12.350048
Event: BiOS '99 International Biomedical Optics Symposium, 1999, San Jose, CA, United States

Abstract

T-Sensors have been demonstrated to allow both absorption- and fluorescence-based detection of analytes directly in complex samples such as whole blood and contaminated environmental samples, without prior separation of blood cells or other soluble and insoluble components. In this paper, we present the implementation of electrochemical detection methods in T- Sensors, as well as their optical validation. Microelectrodes integrated with etched microfluidic flow channels allow traditional electroanalytical techniques to be performed on microliter and smaller volumes and also enable new detection techniques which are based upon the interaction between the microelectrodes and the diffusional mixing that occurs between flow lamina at low Reynolds numbers. Conductivity versus mixing measurements, anodic stripping voltammetry, and isolation of microelectrodes by sheath flow are demonstrated for an experimental device. In a T-Sensor, a sample solution, a receptor solution, and, optionally, a reference solution (a known analyte standard) are introduced in a common channel (T- SensorTM), and laminarly flow next to each other until the exit the structure. Smaller particles such as ions or small proteins diffuse rapidly across the fluid boundaries, whereas larger molecules diffuse more slowly. Large particles show no significant diffusion within the time the two flow streams are in contact. Two interface zones are formed between the fluid layers. The ratio of a property (e.g., fluorescence intensity, stripping voltammetry signal) of the two interface zones is a function of the concentration of the analyte, and is largely free of cross-sensitivities to other sample components and instrument parameters.

Citation Download Citation

Bernhard H. Weigl, Robert B. Darling, Paul Yager, Jennah Kriebel, and Kelly Mayes "Optical and electrochemical diffusion-based detection of analytes in complex samples using microfabricated flow structures (T-Sensors)", Proc. SPIE 3606, Micro- and Nanofabricated Structures and Devices for Biomedical Environmental Applications II, (3 June 1999); https://doi.org/10.1117/12.350048

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available