Development of active 6-DOF microvibration control system using giant magnetostrictive actuator

Yoshiya Nakamura; Masanao Nakayama; Keiji Masuda; Kiyoshi Tanaka; Masashi Yasuda; Takafumi Fujita

doi:10.1117/12.348673

18 May 1999 Development of active 6-DOF microvibration control system using giant magnetostrictive actuator

Yoshiya Nakamura, Masanao Nakayama, Keiji Masuda, Kiyoshi Tanaka, Masashi Yasuda, Takafumi Fujita

Proceedings Volume 3671, Smart Structures and Materials 1999: Smart Systems for Bridges, Structures, and Highways; (1999) https://doi.org/10.1117/12.348673
Event: 1999 Symposium on Smart Structures and Materials, 1999, Newport Beach, CA, United States

Abstract

An active 6-DOF microvibration control system using giant magnetostrictive actuators is developed in order to realize microvibration-free space for precision instruments which hate vibration. A giant magnetostrictive actuator is suitable as a displacement actuator for active microvibration control, because it is both compact and durable and also its response against input is fast and reliable. The developed device consists of a table, six air springs, eight magnetostrictive actuators and six accelerometers on the table. Four actuators are set in the horizontal directions, and another four in the vertical direction. Since air springs and actuators as a unit of vertical support system are arranged in parallel, readjustment of the system is quite easy, even when operating load on the table is changed. The dimension of table is 2000mm in length and 1400mm in width and 230mm in height and the weight of about 2 tons. Operating load on the table is 2 tons. A giant magnetostrictive rod is 6mm in diameter and 50mm in length. The actuators operate within the stroke range of +/- 25 micrometers . Feedback, control strategy using only six components of table acceleration on the table is adopted and the controller is designed by a model matching model. The obtained control performance of the system through two vibration control test can be summarized as follows: (1) Root-mean-square values of the table accelerations under micro-tremor are reduced to 1/3 to 1/10 of the floor accelerations, and kept less than 0.008cm/s². (2) Induced vibrations by impacts acting on the table disappear in less than 0.05sec.

Citation Download Citation

Yoshiya Nakamura, Masanao Nakayama, Keiji Masuda, Kiyoshi Tanaka, Masashi Yasuda, and Takafumi Fujita "Development of active 6-DOF microvibration control system using giant magnetostrictive actuator", Proc. SPIE 3671, Smart Structures and Materials 1999: Smart Systems for Bridges, Structures, and Highways, (18 May 1999); https://doi.org/10.1117/12.348673

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available