Paper
2 August 1999 Sorbent coatings for detection of explosives vapor: applications with chemical sensors
Eric J. Houser, Robert Andrew McGill, Todd E. Mlsna, Viet K. Nguyen, Russell Chung, Robert L. Mowery
Author Affiliations +
Abstract
A series of chemoselective polymers have been designed and synthesized in order to enhance the nitroaromatic sorption properties of coated acoustic wave devices. Acoustic wave devices coated with a thin layer of chemiselective polymer can provide highly sensitive transducers for the detection of vapors or gases. The sensitivity and selectivity of the sensor depends on several factors including the chemoselective coating used, the physical properties of the vapor(s) of interest, the selected transducer, and the operating conditions. To evalute the effectiveness of the chemoselective coatings a polynitroaromatic vapor test bed was utilized to challenge polymer coated SAW devices. Detection limits with the coated SAW sensors, as tested under laboratory conditions, are determined to be in the lower parts per trillion range. FTIR studies were undertaken to determine the nature of the polymer-polynitroaromatic interactions.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric J. Houser, Robert Andrew McGill, Todd E. Mlsna, Viet K. Nguyen, Russell Chung, and Robert L. Mowery "Sorbent coatings for detection of explosives vapor: applications with chemical sensors", Proc. SPIE 3710, Detection and Remediation Technologies for Mines and Minelike Targets IV, (2 August 1999); https://doi.org/10.1117/12.357062
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

FT-IR spectroscopy

Sensors

Chemical fiber sensors

Molecules

Acoustics

Chemical elements

Back to Top