Paper
8 September 1999 Preparation and structure characterization of CeO2 films on stainless steel substrates deposited by laser ablation with Ar+ ion beam assistance
Xintang Huang, You-qing Wang, Qiulang Wang, Qingming Chen, Qiyang Xu, Zhongke Wang
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361118
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
Abstract
The CeO2 films were deposited by pulsed laser ablation on stainless steel substrates at room temperature with the Ar+ ion beam assistance. The results show that when the CeO2 films were deposited directly on the stainless steel substrates, the desired (001)-normal textured were achieved, but there was no evidence for alignment of in- plane crystal axes. Further experimental results indicate that CeO2/YSZ (Yttria-Stabilized Zirconia)/stainless steel films deposited under the same conditions are not only normal orientation to the substrate's surface but also highly in-plane textured.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xintang Huang, You-qing Wang, Qiulang Wang, Qingming Chen, Qiyang Xu, and Zhongke Wang "Preparation and structure characterization of CeO2 films on stainless steel substrates deposited by laser ablation with Ar+ ion beam assistance", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); https://doi.org/10.1117/12.361118
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ion beams

Argon

Laser ablation

Crystals

Laser crystals

Laser energy

Laser systems engineering

Back to Top