Behavior of an embedded piezoceramic transducer for Lamb wave generation in mechanical loading

Christophe A. Paget; Klas Levin; Christophe Delebarre

doi:10.1117/12.388853

22 June 2000 Behavior of an embedded piezoceramic transducer for Lamb wave generation in mechanical loading

Christophe A. Paget, Klas Levin, Christophe Delebarre

Proceedings Volume 3985, Smart Structures and Materials 2000: Smart Structures and Integrated Systems; (2000) https://doi.org/10.1117/12.388853
Event: SPIE's 7th Annual International Symposium on Smart Structures and Materials, 2000, Newport Beach, CA, United States

Abstract

The concept of a built-in structural health monitoring system has attracted great interest as such systems may allow reduced maintenance cost and increased safety. One attractive technique to realize such a system in composites is to use embedded transducers to generate Lamb waves. The damage in the structure is detected by determining the change in the character of the Lamb waves as an effect of damage. In this paper, the performance of embedded piezoceramic transducers used as Lamb-wave generators was investigated. The composite specimens with a piezoceramic transducer embedded in the mid- plane were subjected to tensile and compressive static loading as well as fatigue loading. A surface-attached acoustic emission sensor further detected the Lamb waves. Measurements of the impedance were also performed during static loading to evaluate the electrical conduction of the piezoceramic transducer. During static loading, the embedded piezoceramic transducers functioned near to the final failure of the composite without significant changes in the generated Lamb waves, although the microscopic examination indicated damage. Debonding between the surfaces of the piezoceramic element and the interconnectors as well as failure in the piezoceramic element had occurred. In fatigue, for a stress ratio of -1, the piezoceramic transducers also showed a large working range. The amplitude and frequency of the Lamb waves, generated by the piezoceramic transducers, were not significantly changed after a large number of cycles, around 50,000 - 100,000 cycles at strain levels of ± 0.20%. The changes in terms of amplitude and frequency of the Lamb waves, occurring after a large number of cycles, were associated with increasing matrix cracks in the specimen.

Citation Download Citation

Christophe A. Paget, Klas Levin, and Christophe Delebarre "Behavior of an embedded piezoceramic transducer for Lamb wave generation in mechanical loading", Proc. SPIE 3985, Smart Structures and Materials 2000: Smart Structures and Integrated Systems, (22 June 2000); https://doi.org/10.1117/12.388853

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available