Paper
12 April 2001 Laser raster conditioning of KDP and DKDP crystals using XeCl and Nd:YAG lasers
Michael C. Staggs, Ming Yan, Michael J. Runkel
Author Affiliations +
Abstract
Laser conditioning by raster scanning DKP and DKDP crystals using Nd:YAG and XeCl excimer laser systems was demonstrated. The laser systems were evaluated to determine their respective feasibility of improving the damage thresholds of the harmonic materials for use on the National Ignition Facility (NIF). Crystals were first evaluated using an Nd:YAG laser (355 nm, 7.6 ns) by scanning 2 x 2 cm2 areas with sub-damage threshold fluences and then performing unconditioned (S/1) damage tests at 355-nm in the respectively scanned regions. Subsequently, five KDP and DKDP samples of various damage quality were raster scanned in a similar fashion at MicroLas GmbH (Goettingen, Germany) using a commercial Lambda Physik Excimer system (XeCl, (lambda) equals 308 nm, 20 ns). The samples treated in Germany were then tested at Livermore National Laboratory (LLNL) at 355 nm to demonstrate the excimer's potential as an alternative conditioning source.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael C. Staggs, Ming Yan, and Michael J. Runkel "Laser raster conditioning of KDP and DKDP crystals using XeCl and Nd:YAG lasers", Proc. SPIE 4347, Laser-Induced Damage in Optical Materials: 2000, (12 April 2001); https://doi.org/10.1117/12.425050
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Raster graphics

Laser crystals

Excimer lasers

Laser damage threshold

Nd:YAG lasers

Excimers

Back to Top