Paper
9 April 2002 Influence of storage conditions on the LIDT of very high damage resistance mirrors
Guillaume Ravel, Philippe Bouchut, Pierre Garrec, Bernard Andre, Carol Le Diraison, Herve Bercegol
Author Affiliations +
Abstract
Contamination of surfaces prior to or during deposition of dielectric multilayers has been a classical subject of technological studies, but post deposition contamination has not been reported as often. Previous results typically dealt with sealed optics and exposition to laser or UV conditions, or on-orbit optical systems: we report here observations on HfO2/SiO2 mirrors designed for the Megajoules project, with very high laser resistance. Performances in terms of laser damage thresholds at 1.06 micrometers have been measured periodically over periods of several months, on different sets of samples. Comparison of R/1 LIDT distributions are presented versus time and storage conditions. Degradation of LIDT is clearly observed. Recovery methods are investigated.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guillaume Ravel, Philippe Bouchut, Pierre Garrec, Bernard Andre, Carol Le Diraison, and Herve Bercegol "Influence of storage conditions on the LIDT of very high damage resistance mirrors", Proc. SPIE 4679, Laser-Induced Damage in Optical Materials: 2001, (9 April 2002); https://doi.org/10.1117/12.461684
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Contamination

Resistance

Ultraviolet radiation

Laser induced damage

Atmospheric optics

Nitrogen

RELATED CONTENT

The impact of contamination and aging effects on the long...
Proceedings of SPIE (November 16 2018)
UV damage mechanisms in oxide high reflectors
Proceedings of SPIE (December 30 2008)
Excimer mirror thin film laser damage competition
Proceedings of SPIE (December 06 2011)

Back to Top