Paper
11 June 2002 Simulation of ultrasonic preload measurement on a bolt in an interference fit joint
Author Affiliations +
Abstract
An instrument called the ultrasonic extensometer is used to measure tensile preload in bolts. Commercial ultrasonic extensometers are intended for bolts in a clearance fit joint and not the interference fit joint. This paper develops theory governing the ultrasonic preload measurements when a diametrical interference is present in the joint. The theoretical model accounts for a change in the joint temperature. The model accounts for two cases, one when the bolt is preloaded by turning the nut and the other when the bolt is loaded due to a direct pull on bolt. The paper provides an ultrasonic technique to estimate the interference pressure and diametrical interference without disassembling the joint. A special case of the model, when the diametrical interference is zero, provides a more precise theoretical model for the preload measurement on bolts under pure tensile preload. The theory is modeled in a computer program to provide the preload measurement characteristics. A numerical example computes preload characteristics of a sleeve bolt whose experimental characteristics have been previously published by the author. The experimental and theoretical characteristics show good agreement.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ajay M. Koshti "Simulation of ultrasonic preload measurement on a bolt in an interference fit joint", Proc. SPIE 4702, Smart Nondestructive Evaluation for Health Monitoring of Structural and Biological Systems, (11 June 2002); https://doi.org/10.1117/12.469904
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultrasonics

Tellurium

Temperature metrology

Head

Ultrasonography

Calibration

Time metrology

Back to Top