Paper
27 January 2004 Impact of random jitter on a laser satellite communication system with an optical preamplifier
Author Affiliations +
Abstract
In this work we derive a model, which optimizes the performance of a laser satellite communication link with an optical preamplifier in the presence of random jitter in the transmitter-receiver line of sight. The system utilizes a transceiver containing a single telescope with a circulator. The telescope is used for both transmitting and receiving and thus reduces communication terminal dimensions and weight. The optimization model for optimal transmitted power and transceiver gain was derived under the assumption that the dominant noise source was amplifier spontaneous emission (ASE) noise. We investigate the effect of the amplifier spontaneous emission noise on the optimal transmitted power and gain by performing an optimization procedure for various combinations of amplifier gains and noise figures. It was shown that the amplifier noise figure determines the transmitted power needed to achieve the desired BER, but does not affect the transceiver telescope gain. We found in our numerical example that for a BER of 10-9, doubling the amplifier noise figure results in an 80% increase of minimal transmitted power for rms pointing jitter of 0.44 μrad.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anna Polishuk and Shlomi Arnon "Impact of random jitter on a laser satellite communication system with an optical preamplifier", Proc. SPIE 5160, Free-Space Laser Communication and Active Laser Illumination III, (27 January 2004); https://doi.org/10.1117/12.504561
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transceivers

Optical amplifiers

Receivers

Telescopes

Transmitters

Satellite communications

Telecommunications

Back to Top