Paper
30 April 2004 Novel design for interleaver based on interleaved sampled Bragg gratings with Si-on-Ti:LiNbO3 waveguides
Author Affiliations +
Proceedings Volume 5279, Optical Fibers and Passive Components; (2004) https://doi.org/10.1117/12.521471
Event: Asia-Pacific Optical and Wireless Communications, 2003, Wuhan, China
Abstract
A novel 16-channel 50-GHz spacing interleaver for dense wavelength-division multiplexing (DWDM) systems has been realized using Ti:LiNbO3 waveguides with the corrugated Si overlays. High refractive-index Si layer on LiNbO3 waveguide enables a large index perturbation to strongly affect the mode index of the composite structure. The reflection spectra strength of each peaks and bandwidths of the individual channels are increased by interleaving several sampled gratings together. The modal characteristics have been analyzed by employing vectoric finite element method. The reflectivity has been obtained by formulating the transmission matrix of the structure. An odd-even channel separator with a gratings length of approximately 11 mm has been fabricated and its reflection spectrum has been measured. The -1-dB channel bandwidth is ≥ 0.2 nm and the sidelobes are < -20 dB.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hang-you Lin, Ji-ping Ning, and Wen Xu "Novel design for interleaver based on interleaved sampled Bragg gratings with Si-on-Ti:LiNbO3 waveguides", Proc. SPIE 5279, Optical Fibers and Passive Components, (30 April 2004); https://doi.org/10.1117/12.521471
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Silicon

Fiber Bragg gratings

Reflectivity

Dense wavelength division multiplexing

Dielectric filters

Multiplexers

Back to Top