Performance analysis of a 127-micron pixel large-area TFT/photodiode array with boosted fill factor

Richard L. Weisfield; William Yao; Tycho Speaker; Kungang Zhou; Richard E. Colbeth; Cesar Proano

doi:10.1117/12.535896

6 May 2004 Performance analysis of a 127-micron pixel large-area TFT/photodiode array with boosted fill factor

Richard L. Weisfield, William Yao, Tycho Speaker, Kungang Zhou, Richard E. Colbeth, Cesar Proano

Proceedings Volume 5368, Medical Imaging 2004: Physics of Medical Imaging; (2004) https://doi.org/10.1117/12.535896
Event: Medical Imaging 2004, 2004, San Diego, California, United States

Abstract

Sensor fill factor is one of the key pixel design requirements for high performance imaging arrays. In our conventional imaging pixel architecture with a TFT and a photodiode deposited in the same plane, the maximum area that the photodiode can occupy is limited by the size of the TFT and the surrounding metal lines. A full fill factor array design was previously proposed using a continuous sensor layer1. Despite the benefits of 100% fill factor, when applied to large-area applications, this array design suffers from high parasitic line capacitances and, thus, high line noise. We have designed and fabricated an alternative pixel structure in which the photodiode is deposited and patterned over the TFT, but does not overlap with the lines underneath. Separating the diode from the TFT plane allows extra space for an additional TFT which can be used for pixel reset and clipping excessive charge in the photodiode developed under high illumination. This reduces memory effect by 250%. The yield and the reliability are expected to improve as well since the TFTs and lines are buried underneath the diode. With the increased fill factor, we collect 56% more electrons per pixel, thereby improving the signal to noise ratio. The maximum signal to noise ratio is achieved when the increased signal and the undesirable parasitic capacitance on the data line are best optimized. Linearity, sensitivity, leakage, and MTF characteristics of a prototype X-ray imager based on this architecture are presented.

Citation Download Citation

Richard L. Weisfield, William Yao, Tycho Speaker, Kungang Zhou, Richard E. Colbeth, and Cesar Proano "Performance analysis of a 127-micron pixel large-area TFT/photodiode array with boosted fill factor", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.535896

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available