Paper
28 May 2004 Double exposure to reduce overall line-width variation of 80-nm DRAM gate
Won Kwang Ma, Chang-Moon Lim, Se Young Oh, Byung Ho Nam, Seung Chan Moon, Ki Soo Shin
Author Affiliations +
Abstract
As design rule shrinks down continuously, various technology have been developed to extend the resolution limits of lithography. One of those is Double Exposure Technology(DET). This paper is about not only resolution improvement but also Critical Dimension(CD) variation reduction with DET. As the design rule shrinks below 100nm, the core/peripheral area where we used to think we had sufficient margin is becoming the bottle neck for device fabrication. In this paper, in order to compare optimized single exposure (cell focus) and DET (cell, core/peripheral focus) for critical dimension uniformity(CDU) on cell and core/peripheral area, CDU was measured from wafer by use of simulation and measurement. Gate layer of DRAM device was used for the experiment. Exposure condition for the single exposure was set to crosspole and for DET, dipole and conventional respectively. Optical proximity correction(OPC) was done with in-house simulation tool on stiching area of the double exposure experiment. Same exposure tool and same process condition were used for each experiment and only the exposure condition was changed to compare local CDU, intra-field CDU, wafer CDU to find out how much CD variation can be reduced.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Won Kwang Ma, Chang-Moon Lim, Se Young Oh, Byung Ho Nam, Seung Chan Moon, and Ki Soo Shin "Double exposure to reduce overall line-width variation of 80-nm DRAM gate", Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); https://doi.org/10.1117/12.536358
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Semiconducting wafers

Lithography

Optical proximity correction

Scanners

Transistors

Fiber optic illuminators

Back to Top