Design and control of a proof-of-concept variable-area exhaust nozzle using shape memory alloy actuators

Gangbing Song; Ning Ma; Hou-Jun Lee; Steven Arnold

doi:10.1117/12.543563

29 July 2004 Design and control of a proof-of-concept variable-area exhaust nozzle using shape memory alloy actuators

Gangbing Song, Ning Ma, Hou-Jun Lee, Steven Arnold

Proceedings Volume 5388, Smart Structures and Materials 2004: Industrial and Commercial Applications of Smart Structures Technologies; (2004) https://doi.org/10.1117/12.543563
Event: Smart Structures and Materials, 2004, San Diego, CA, United States

Abstract

There is no reported research of using shape memory alloy (SMA) actuators for variable area exhaust nozzle for a jet engine in the literature, to the authors' best knowledge. SMA actuators have the advantages of high power-to-weight ratio and can result in dramatic weight reduction as compared to hydraulic systems. However, the difficulty of using SMA actuators for controlling variable area exhaust nozzle lies in the fact that the temperature near exhaust nozzle is far higher than the transformation temperature of an SMA actuator. Due to the flexibility and small volume of SMA wire actuators, they can be remotely replaced in a region where temperature is lower than that of its transformation temperature. By exploiting this fact, this paper presents a novel design of a proof-of-concept variable area exhaust nozzle using shape memory alloy wire actuators. The SMA actuators are remotely placed away from the exhaust nozzle area so that the environmental temperature is below their transformation temperature. By electrically heating the SMA actuators, the exhaust nozzle will experience an area reduction of up to 40%. Bias springs will apply forces to return the fan nozzle to the open-up configuration. A feedback controller based sliding mode method is used to regulate the SMA actuators' position. Experimental results demonstrate that the proposed design meets the desired area variation specifications and show the promise of a lightweight and simple exhaust nozzle design by using shape memory alloy actuators.

Citation Download Citation

Gangbing Song, Ning Ma, Hou-Jun Lee, and Steven Arnold "Design and control of a proof-of-concept variable-area exhaust nozzle using shape memory alloy actuators", Proc. SPIE 5388, Smart Structures and Materials 2004: Industrial and Commercial Applications of Smart Structures Technologies, (29 July 2004); https://doi.org/10.1117/12.543563

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available