Paper
23 December 2004 High-power Er:YAG laser at 1646 nm pumped by an Er,Yb fiber laser
Author Affiliations +
Proceedings Volume 5620, Solid State Laser Technologies and Femtosecond Phenomena; (2004) https://doi.org/10.1117/12.578217
Event: European Symposium on Optics and Photonics for Defence and Security, 2004, London, United Kingdom
Abstract
In this paper we describe an Er:YAG laser pumped by a tunable, cladding-pumped Er,Yb fiber laser and discuss factors affecting the laser performance. Crystals with different Er3+-concentrations in the range 0.5% to 4 at% and with crystal lengths selected for ~95% absorption of the pump light at 1532nm were used, and the laser performance was investigated for a range of output coupler transmissions (2-30%) at 1646nm. In preliminary experiments we have achieved a maximum output power of 4W at 1646nm for 11W of absorbed pump power corresponding to an efficiency of 36%, using a crystal with 0.5at% Er3+-concentration and an output coupler transmission of 10%. Our experiments have revealed that the cw efficiency decreases quite markedly for higher Er3+-concentrations. The origin this behavior is currently the subject of a detailed experimental investigation and our preliminary findings will be presented. The prospects for further increase in output power and efficiency will also be discussed.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Jander, Jayanta K. Sahu, and W. Andrew Clarkson "High-power Er:YAG laser at 1646 nm pumped by an Er,Yb fiber laser", Proc. SPIE 5620, Solid State Laser Technologies and Femtosecond Phenomena, (23 December 2004); https://doi.org/10.1117/12.578217
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Er:YAG lasers

Erbium

Crystals

Absorption

Laser crystals

Output couplers

Back to Top