Paper
21 February 2005 Integrated facility of UV and IR laser process to enhance laser damage resistance of large scale 3w optics
Author Affiliations +
Abstract
A new facility has been designed to enhance laser damage resistance at 351 nm of large scale 3w KDP and silica optics by laser treatment. This facility is a prototype, and the process will be industrialized as a means of fabrication of the LMJ optics. The first step of the process is a conditioning/initiation step, which consists of a UV laser raster scan of the whole optics; the second step is a step of detection and analysis of damage possibly initiated during the previous step; the third step is a mitigation step, which consists of a local melting of the detected damage on silica surface, in order to stop their growth. The facility is equipped with a 3w Nd:YAG laser allowing the process of both KDP and silica. A CO2 laser is used for damage mitigation. Both the lifetime increase and the reduction of the process duration of large scale optics have been taken into account with a view to industrialize the process.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Annelise During, Laurent Lamaignere, Philippe R. Bouchut, and Herve Piombini "Integrated facility of UV and IR laser process to enhance laser damage resistance of large scale 3w optics", Proc. SPIE 5647, Laser-Induced Damage in Optical Materials: 2004, (21 February 2005); https://doi.org/10.1117/12.585001
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Laser induced damage

Raster graphics

Resistance

Excimer lasers

Gas lasers

YAG lasers

RELATED CONTENT


Back to Top