Melt ejection during single-pulse drilling and percussion drilling of micro holes in stainless steel- and nickel-based superalloy by pulsed Nd:YAG laser radiation

Lena Trippe; Jens Willach; Ernst Wolfgang Kreutz; Wolfgang Schulz; J. Petereit; Stefan Kaierle; Reinhart Poprawe

doi:10.1117/12.596578

8 October 2004 Melt ejection during single-pulse drilling and percussion drilling of micro holes in stainless steel and nickel-based superalloy by pulsed Nd:YAG laser radiation

Lena Trippe, Jens Willach, Ernst Wolfgang Kreutz, Wolfgang Schulz, J. Petereit, Stefan Kaierle, Reinhart Poprawe

Author Affiliations +

Proceedings Volume 5662, Fifth International Symposium on Laser Precision Microfabrication; (2004) https://doi.org/10.1117/12.596578
Event: Fifth International Symposium on Laser Precision Microfabrication, 2004, Nara, Japan

Abstract

Single pulse drilling and percussion drilling of micro holes (diameter 100 μm, depth 2 mm) with Nd:YAG laser radiation (pulse duration 100 - 500 μs) in stainless steel (X5CrNi18-10) and nickel-based superalloy (CMSX-4) are reported. The development of the hole geometry, especially the hole diameter depending on the focal diameter including caustics and the thickness of the melt at the hole wall, is investigated. The experimental results are compared to the calculations of a physical model describing the motion of the melt front, the phase boundary between liquid and solid. Closures resulting from melt in the hole are detected by recording the expansion of plasma using high speed photography (50000 fps). The quality of drilled holes, e.g. conicity, thickness of recast and closures, is investigated by metallography and optical microscopy. Timescales of physical processes as the onset of melting and vaporization, the time to stationary melt flow and geometrical scales like the hole depth, the closure depth and the hole diameter are determined experimentally and numerically.

Citation Download Citation

Lena Trippe, Jens Willach, Ernst Wolfgang Kreutz, Wolfgang Schulz, J. Petereit, Stefan Kaierle, and Reinhart Poprawe "Melt ejection during single-pulse drilling and percussion drilling of micro holes in stainless steel and nickel-based superalloy by pulsed Nd:YAG laser radiation", Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); https://doi.org/10.1117/12.596578

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available