Paper
11 October 2005 Methods to enhance mode selectivity of higher-output vertical-cavity surface-emitting diode lasers
Robert P. Sarzała, Włodzimierz Nakwaski
Author Affiliations +
Abstract
Designing strategy to enhance mode selectivity of higher-output vertical-cavity surface-emitting diode lasers (VCSELs) is presented using the oxide-confined GaAs-based (GaIn)(NAs)/GaAs quantum-well VCSEL with two oxide apertures on both sides of its central active region as a typical example. A general strategy is to shift one aperture to the node position of the resonator standing wave where it is working as the electrical aperture only. Then diameters of both the apertures may be changed independently giving an additional degree of freedom for VCSEL designing. The comprehensive optical-electrical-thermal-gain self-consistent approach is used to simulate anticipated performance characteristics of the modified VCSEL. The single fundamental mode operation has been predicted in a large-size device with the 10-μm-diameter active region even for 80 K active-region temperature increase over the room ambient temperature. A similar radial waveguiding may be also produced in VCSELs with the aid of photonic crystals which have been found to create a very efficient discrimination mechanism for higher-order transverse modes. Therefore photonic-crystal confined VCSELs seem to be very promising structures in their future applications.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert P. Sarzała and Włodzimierz Nakwaski "Methods to enhance mode selectivity of higher-output vertical-cavity surface-emitting diode lasers", Proc. SPIE 5958, Lasers and Applications, 59580D (11 October 2005); https://doi.org/10.1117/12.619444
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Oxides

Resonators

Gallium arsenide

Quantum wells

Photonic crystals

Semiconductor lasers

Back to Top