Paper
7 November 2005 Online inspection of thermo-chemical heat treatment processes with CCD camera system
Gerald Zauner, Gerald Darilion, Ronald Pree, Daniel Heim, G. Hendorfer
Author Affiliations +
Abstract
Plasma nitriding belongs to the group of the thermo chemical surface heat treatments. During this process nitrogen is dissociated into the surface of the material increasing hardness, wear resistance, endurance strength and/or corrosion resistance. This paper presents a new inspection system based on a CCD camera system for monitoring such heat treatment processes (PACVD, plasma assisted chemical vapour deposition). Treatment temperatures commonly used are within the range of 350oC to 600oC. A near infrared enhanced CCD camera system equipped with specifically chosen spectral filters is used to measure spectral emittances during the surface modification. In particular the spectral operating range of 950nm to 1150nm of the silicon CCD camera is utilized. The measurement system is based on the principles of ratio pyrometry (dual-band method) known from non-contact temperature measurements, in which two images of the same scene, each taken at slightly different spectral bands, are used to determine the spectral light characteristics. This results in an improved relative sensitivity for spectral changes (i.e. deviations from the gray-body hypothesis) during the surface modification.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerald Zauner, Gerald Darilion, Ronald Pree, Daniel Heim, and G. Hendorfer "Online inspection of thermo-chemical heat treatment processes with CCD camera system", Proc. SPIE 6000, Two- and Three-Dimensional Methods for Inspection and Metrology III, 600006 (7 November 2005); https://doi.org/10.1117/12.630449
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CCD cameras

Plasma

Heat treatments

Imaging systems

Metals

Near infrared

Temperature metrology

Back to Top