Fabrication of three-dimensional near-IR photonic crystals using deep-UV contact photolithography and silicon micromachining

Bhargav S. Citla; Sriram Venkataraman; Janusz Murakowski; Garrett J. Schneider; Dennis W. Prather

doi:10.1117/12.647154

23 January 2006 Fabrication of three-dimensional near-IR photonic crystals using deep-UV contact photolithography and silicon micromachining

Bhargav S. Citla, Sriram Venkataraman, Janusz Murakowski, Garrett J. Schneider, Dennis W. Prather

Author Affiliations +

Proceedings Volume 6109, Micromachining and Microfabrication Process Technology XI; 610903 (2006) https://doi.org/10.1117/12.647154
Event: MOEMS-MEMS 2006 Micro and Nanofabrication, 2006, San Jose, California, United States

Abstract

We report our progress on the fabrication of three-dimensional (3D) photonic crystals to operate at near-infrared (IR) wavelengths using conventional planar silicon micromachining. The method involves patterning a single layer of planar etch mask and a custom etch process to create a 3D array of spherical voids. The etch mask is patterned in polymethyl methacrylate (PMMA) using conventional deep-UV contact photolithography and then transferred to a silicon dioxide (SiO₂) hard mask. The 3D spherical voids are fabricated using a sequence of etching and passivation steps. In the etch step performed in a fluorine-based inductively coupled plasma-etching system, first a layer of spherical voids is created. Then, the spherical voids are passivated by dry silicon oxidation. A subsequent anisotropic removal of oxide at the bottom of the sphere is achieved by high-energy ion bombardment thus enabling the creation of etch mask for the successive layers. Plasma chemistry with high selectivity to oxide is utilized for opening the subsequent layer of spherical voids. By repeating these steps, buried 3D array of spherical voids is obtained. This way, a 3D structure with simple cubic symmetry can be obtained from an etch mask initially patterned with a square lattice of circular holes. Our fabrication method has numerous advantages over alternative approaches as it is based on the well-established CMOS mass fabrication technology, which is compatible with the next generation optoelectronic circuits.

Citation Download Citation

Bhargav S. Citla, Sriram Venkataraman, Janusz Murakowski, Garrett J. Schneider, and Dennis W. Prather "Fabrication of three-dimensional near-IR photonic crystals using deep-UV contact photolithography and silicon micromachining", Proc. SPIE 6109, Micromachining and Microfabrication Process Technology XI, 610903 (23 January 2006); https://doi.org/10.1117/12.647154

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available