Paper
12 May 1986 Optical Properties Of Silver Halide Infrared Transmitting Fibers
A. Satar, F. Moser, S. Saban, D. Weiss, A. Katzir
Author Affiliations +
Proceedings Volume 0618, Infrared Optical Materials and Fibers IV; (1986) https://doi.org/10.1117/12.961097
Event: O-E/LASE'86 Symposium, 1986, Los Angeles, CA, United States
Abstract
Silver halide crystals of composition AgC10.95Br.0.05 were extruded to form infrared transmitting fibers of 0.9 mm diameter and 1.5 meters in length. Microscopic examination reveals an initial fine grain structure with a grain size of the order of 1 pm. Thermal treatment at 200°C following extrusion results in rapid grain growth. Infrared spectral transmission measurements of the fibers show absorption features at 3-3.2 μm, 6.1 μm and 12-13 μm attributed to water and bands at 6.8 and 7.1 pm attributed to COI molecules. These features are superimposed on a scatter loss which has a λ-2 dependence. Transmission measurements at 10.6 μm with a CO2 laser show a linear dependence of power output on power input for levels from 1 to 20 watts incident on the fiber face. For a variety of power input geometries, the power output distribution was independent of the input conditions.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Satar, F. Moser, S. Saban, D. Weiss, and A. Katzir "Optical Properties Of Silver Halide Infrared Transmitting Fibers", Proc. SPIE 0618, Infrared Optical Materials and Fibers IV, (12 May 1986); https://doi.org/10.1117/12.961097
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Infrared radiation

Absorption

Silver

Annealing

Carbon dioxide lasers

Optical properties

Back to Top