Deformation analysis in biomaterials using digital speckle interferometry

R. Salvador; R. González-Peña; R. Cibrián; M. Buend­ía; F. Mínguez; V. Micó; J. A. Carrión; J. J. Esteve-Taboada; T. Molina-Jiménez; S. Simón; E. Pérez

doi:10.1117/12.726639

18 June 2007 Deformation analysis in biomaterials using digital speckle interferometry

R. Salvador, R. González-Peña, R. Cibrián, M. Buendía, F. Mínguez, V. Micó, J. A. Carrión, J. J. Esteve-Taboada, T. Molina-Jiménez, S. Simón, E. Pérez

Author Affiliations +

Proceedings Volume 6616, Optical Measurement Systems for Industrial Inspection V; 661631 (2007) https://doi.org/10.1117/12.726639
Event: Optical Metrology, 2007, Munich, Germany

Abstract

One of the most interesting points when evaluating the response of an implanted prosthesis is the knowledge of how biomaterials behave under a certain deforming stress. Obviously, the greater the stress on a particular moment, the higher possibility of the failure implant. But in many cases, the most important fact regarding the implant failure is due to a lesser stress that is continuously applied. Therefore it is helpful to know how biomaterials respond to this lesser stress. Digital speckle interferometry (DSPI) is suitable for this type of determination because of it is a highly sensitive and non-invasive optical technique. The aim of the presented work is determining the elasticity of biomaterials such as osseous structures and implants used to replace bones and to fix fractures between them. In particular, preliminary results were obtained applied to macerated human radius and a titanium screw used to treat the fractures of this bone. The analysis shows high correlation ratios in determining Young's modulus via DSPI technique in comparison with than that obtained by creation of the bone computer aided design (CAD) model using finite element method (FEM) in ANSYS software. The high degree of concordance between the results of both methods makes it possible to continue studying osseous samples with a fixed implant, and also other implants made of different alloys.

Citation Download Citation

R. Salvador, R. González-Peña, R. Cibrián, M. Buendía, F. Mínguez, V. Micó, J. A. Carrión, J. J. Esteve-Taboada, T. Molina-Jiménez, S. Simón, and E. Pérez "Deformation analysis in biomaterials using digital speckle interferometry", Proc. SPIE 6616, Optical Measurement Systems for Industrial Inspection V, 661631 (18 June 2007); https://doi.org/10.1117/12.726639

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available